SSD Mini Tweaker 2.2

Program author writes that the development should be particularly relevant for those who want to migrate their system from a regular hard disk HDD to SSD, personally I faced with such a task, but I think when purchasing this drive, be sure to take advantage of SSD Mini TweakerApparently it performs a lot of options. The program works perfectly under Windows 7 32 bit and 64.

So, I want to note that the tool does not require any installation, you can immediately after starting to move to the parameter settings, in fact you just have to tick the box on the items that interest you,Then you can save the settings.From skrinshtov clearly shows that such can enable or disable SuperFetch - piece must maintain and improve the system performance, but the author warns that this SSDsuperfluous, is turned off. It should also disable Prefetcher - This feature helps you quickly start programs, but for the SSD is also necessary to turn off all unnecessary.If you have a large amount of memory, it is necessary to "remove the limit with NTFS in terms of memory" - it should greatly improve the performance of the file system.

SSD Mini Tweaker 13 allows you to customize all the parameters, many of them can really improve your system more useful for SSD.In general, I want to thank the author of the program, because it helps novice users, because all of these options can be turned off and no utility, but many do not know where and how they should be shut down orincluded, plus many options may be unclear, but here you can just get a little description and understand it is necessary for you or not. In general, such a development here in front of you, I hope it will really help you when working with the SSD, do not forget to unsubscribe in the comments on this program.

= TRIM - a command that allows the operating system to inform the SSD about which data blocks are no longer used and can be cleaned drive yourself.Use of TRIM SSD allows the device to reduce the influence of "garbage collection", which would otherwise turn into a further decline in the rate of entry in the affected sectors. Support TRIM provides more stable speeds, and reduces wear of free memory locations.
= Superfetch (Supersampling) - a service that maintains and improves system performance by implementing caching frequently used files. Considering the minimum access time SSD-drive, it can be disabled.
= Prefetcher (prefetch) - a component of the operating system Windows, which accelerates the process of its boot and reduces the running programs. For SSD, due to its fast operation, it is not necessary. Turn it off, you can also release the system memory.
= Default kernel reset the paging file. You can force Windows to leave the system kernel in memory, thus speeding up the work of the system and reduce the number of disk accesses. However, you must have more than 2 gigabytes of RAM.
= Increasing the size of the file system cache improves the performance of your computer and influences how often the system will record the changed blocks to disk files, but reduces physicalmemory space available to applications and services. Reducing the amount of recording data to the disk subsystem to minimize the use of the file, but you must have more than 2 gigabytes of RAM.
= When removing the limit to NTFS in terms of memory usage increases the pool pages available for the cache file read / write operations. This makes it easier to run multiple applications at once, but it is desirable to have a large amount of RAM.
= While defrag system files and uckoryaet system load, but SSD useless and even harmful thing. Therefore, it is strongly recommended to disable defragmentation of system files at startup, installed on SSD.
= Every three days during computer downtime in your Windows Prefetch file is created Layout.ini, which maintains a list of files and folders that were used during the boot process and launch the program. Staff disk defragmenter uses the information from the file Layout.ini to optimize the physical location of the files on the disk. However, SSD is completely unnecessary.
= Create file names in the format "8.3" for all long file names and folders on NTFS partitions can slow down the transfer of items in folders. You can choose to disable the creation of the names in the format of MS-DOS.
= Windows Search Service performs indexing of files and folders. If the system is installed on the SSD-drive, the increase in productivity from the use of this function is unlikely to be noticeable, and therefore it makes sense to disable the Windows Search.
= Disabled hibernation and deleting the file hiberfil.sys, you can free up the volume on the SSD, the appropriate amount of installed memory, the most important for the owners of small capacity SSD.
= Disable the protection system (System Restore), you free up more space on the system drive and reduce the number of writes to the SSD.Checkpoints may take up to 15% of the total and are not available for the team TRIM. Regular use of this feature, Windows has the potential to eventually lead to a decrease in performance of the drive.
= SSD-drive did not need to defragment, with the same access time for all memory cells. Therefore, the service can be turned off defragmentation.
= When you put a paging file on the SSD, it is recommended to disable paging file clean when you restart the system, as there is an additional disk access (removal of data from a fileswap, which leads to an increase in time off and reboot the computer.) When disconnected the paging file key "ClearPageFileAtShutdown" take a value of zero, and the option itself will be blocked. By default, clearing the paging file is disabled already in the system.

- Added ability to disable the paging file.
- Added the possibility to activate a hidden AHCI mode in the system.
- Renamed the option "Disable Paging File Cleaner" into "Do not clean the paging file."
- Minor visual improvements and minor bug fixes.
- Supplemented and amended the help file.