Insertion XBOX 360 Slim (FAQ) guide

Sews XBOX 360 Slim

At the moment, XBOX 360 Slim set several different slim drives:
Hitachi. LiteOn DG-16D4SNew LiteOn DG-16D5S
Sew only LiteOn DG-16D4S
Hitachi and the new LiteOn DG-16D5S It is not sewn.
Distinguish drive Hitachi from LiteOn It can be shaped holes in the tray:



Determine whether you got the neproshivaemy LiteOn DG-16D5S, you can just make out the console and read what is written on the drive:



So stitched drives LiteOn DG-16D4S. Firmware version 9504, 0272, 0225, 0401, 1071
Only drives LiteOn DG-16D4S 9504/0272 with firmware and dashboards to 13599 can easily ask since unlocked. Drives with firmware 0272 (if you have dashboards 13599), 0225, 0401 and 1071 are blocked.
The ability to read the key there is only until they are modified or unlocked
NB: after updating dashboards (13,146) all LiteOn Slim 9504 are 0272, after updating dashboards (13599) 0272 become blocked.
NB: If you have not already, update to the latest version dashboards before flashing on the LT +.


Download JungleFlasheru003e
You must have installed .net framework
.net framework 2.0 or later for Windows XP
.net framework 3.5 SP1 for Windows Vista
.net framework is already built into Windows 7
If you have a bug libUSB.dll error, copy the file from his libUSB.dll folders in the same directory where the JungleFlasher.exe.



Put all your .bin firmware files in the folder firmware. Download the latest version of the firmware iXtreme from conventional sources, and put all the .bin files in the folder firmware, which is inside the folder JungleFlasher.

If you are using a VIA card - remove the drivers. Drivers lead to problems with many drives, particularly with erased LiteOn, which leads to the infamous «LiteOn + VIA hangs."

On all operating systems other than Win XP x86 JungleFlasher must be run as administrator.
Right-click on the icon JungleFlasher and select Run as administrator:



or choose properties u003e compatibilityTick, click OK



After starting JungleFlasher You must make sure that PortIOXX * .sys running.
This is easily done by looking at the log in the lower window. (* XX - is either 32 or 64 depending on the operating system).



If you use X360USB ProThen you do not need PortIO:

Removing the key from the locked LiteOn Slim 0225, 0272, 0401, 1071

Disassemble the console, remove the SATA cable from the drive and connect the drive to your computer. Turn on your computer, run JungleFlasher (necessarily download the latest version). Turn on the console.
First, select the tab DVDKey 32:



NB: very few chipsets are stable with 0225 (and subsequent) results, use X360USB Pro.
Make sure the drive, press and hold SlimKey:



A window will appear with a proposal to send Slim UnlockChoose No.



JungleFlasher start reading the key data.



A window appears:



Press Yes, Then turn off and turn on the console.
After the key is removed, it will be tested.

How to flash Xbox 360 slim 2

JungleFlasher process the information and create Dummy.bin file. You will be asked to save the file (As always, please do so!)!

firmware xbox360 slim home

Automatically open tab Firmware Tool 32 Dummy.bin and your file is loaded as a source.


Chips for boards drives do two manufacturers. Methods unlock boards from different manufacturers vary. Open your drive and look at the big chip on the motherboard. If you see 03, Consider that you are lucky, you will find a relatively easy way, if 05You will be a way to Kamikaze.

How do I flash xbox360


There are several methods to unlock the card, note three main ones.
They all operate on the same principle. And their use is almost identical.

1. Fee Sputnik360 MX Edition of Team-Xecuter



Easy to install with switch board, making it very easy to unlock. You will need to cut one track and solder 3 points to set the fee into your drive. This will make a firmware update in the future simple as possible.

2. Probe Sputnik MX Probe of Team-Xecuter

team xecuter xbox 360

Cut the track, as shown below and touch pad at the right time.

full hack Xbox 360

3. Russian hacking

It includes cutting the track as shown above and solder 10 ohm resistor (approximately) to the ground. Then, at the right time touch pad cut.

how to crack the Xbox 360 slim hack


CAUTION: It looks simple - but YOU can make a mistake is very, very easy. Using this method is VERY EASY TO CUT NOT THE WIRE, or more than one wire, it will spoil the chip and make it useless. Do not complain if you get it wrong - you have been warned.

The method involves drilling holes in a chip with simultaneous supply voltage to the bit through 3.3 ohm resistor 100 and at the same time sending the unlock command actuator. The figure below shows the complexity of the operation and the point where you have to get there.

Hacking the Xbox 360 Home

First, you need to as accurately as possible note on the upper side of the chip to the point that you have to get there to find the wire inside. Do not rely on text labeling, it may be applied in different ways on different chips.

hacking xbox slim at home

For the purity shown unspecified chip. Count 5 feet to the right in the upper and lower row of contacts, draw a line very thin scalpel blade. Then count 8 feet from the top the left and right row of contacts, draw a line. The intersection point - the point at which you have to make a hole. There are several methods for this: drilling, soldering iron, knife. Boring, perhaps, the most accurate - it is assumed that you have a steady hand and a good eye.

You can use a set of Maximus Kamikaze Template Kit



Once again, do not keep trying until you are not sure you understand the risks, just so this method is not would call BY KAMIKAZE

Slowly drill chip by applying a voltage of 3.3 V drill through a 100 ohm resistor.

hacking xbox 360 main thing that the hands are not shaking

Voltage 3.3 V can be taken from the board itself. Keep in constant contact wire and drill all the time while drilling.

hacked xbox 360 slim

The main accuracy and very light pressure. Drill slowly to peresverlit or damaging other conductors in the chip.
Wait for the beep and check the status on the screen. (Here used a drill diameter of 0.8 mm).
WE ARE NOT RESPONSIBLE IF YOU DRIVE spoil this method. If you are unsure, you pay a professional for this job.


First, prepare yourself to the method Winbond or MXIC you selected. Then run JungleFlasherSelect the tab MTK Flash 32. Select the correct I / O Port. Apply power to the drive, click the update I / O Port and ensure that the properties of a drive there.

how to crack the Xbox 360 slim User

Now click Intro / Device ID. When will enter the Vendor Mode, Press button SPI Status (Now showing 0x8C).



Since your drive is locked, a message appears:



Press Yes. JungleFlasher will repeatedly send commands to unlock the drive. It will be displayed in the log point appears .......



NB: CONVENIENCE Ensure that the speakers computer is on and the volume to maximum, WAIT BEEP, once received UNLOCKED STATUS 0x00

From this point on, proceed according to the chosen method of unlocking.
For MXIC:
a) Set Sputnik360 MX switch unlock
b) Tap the cut pad probe Sputnik MX Probe
c) Touch pad cut wire Russian hacking

For Winbond:
Start the drill, make sure that the drill is in constant contact with the source voltage of 3.3 V.
Do it slowly! You will need good luck!

At the moment JungleFlasher successfully unlocks the drive, the speakers will sound a double beep and you will see the following:


Once obtained the status 0x00 immediately a) set the switch to normal / b) c) touch pad stop / stop drilling!

Now, as always, read the original firmware from the drive, press Read.



In the process of reading a window.

How to flash Xbox 360 at home 4

Press YesThen turn off and turn on the console. You will be asked to keep your firmware - DO IT.
This is your original firmware, save it in a safe place.



Press Save. Your firmware is automatically loaded as the source tab Firmware Tool 32. You will be asked whether you want to download iXtreme automatically. Press Yes.



Latest iXtreme firmware is automatically loaded from a folder firmware (Where you had to put it before).
Your drive will transfer data into the firmware, it is ready to write to the drive.



Make sure that the keys in the input and output are the same firmware. For the record prepared by the firmware in the drive you have to set the drive mode Vendor Mode again. Simply select the tab MTK Flash 32.

How to flash xbox360 house 6

Now click Intro / Device ID. You may ask, or may not turn off and turn on the power.

Xbox360 console firmware

If asked, press Yes, Then disconnect and turn on the power console. The drive should go into the Vendor Mode again.



Thus, the drive mode Vendor ModeSelect button Write



Recording will start and its progress will be shown in the log:



Writing successful. Now LOCK Drive!

To lock the drive, he should be in a mode Vendor Mode. So, once again press Intro / Device ID. You will be asked to turn off and turn on the power.



Press Yes, Then disconnect and turn on the power console. The drive should go into the Vendor Mode again.
Just click Spi Status (Now 0x00)



A warning:



Click OK. You must log in to see the following:



Button Spi Status should now show 0h8S:



Press button Outro / ATA Reset:



IMPORTANT! After sending Outro / ATA ResetIf all you see is hovering at the stage of sending the command log, as shown above, you have to press Outro / ATA Reset again.

If you see this message on the verification is successful, everything went well.



Now turn off the power to the drive, disconnect it from the computer, assemble and test the XBOX.

That's all!

P.S. But best of all is to do if you have a donor (a console which bought on the cheap) does not own, for the experience! Good luck!

Tags: Insertion. Firmware. Instructions Xbox 360. FAQ. Xbox360 Soft. XBOX 360. Xbox. Soft. Software Xbox 360. Software
Discuss

---

Man: Instructions for use / Mens Manual (Lee Won Sok) (2013, comedy, HDTVRip 720p)
Cobra ODE breaks PS3 Super Slim
1 ~~~ FAQ ~~~ 1 Instructions for converting PS2 Classics
Microsoft is testing a new application for easy change of the region in the Xbox Live
Download System Update for the Xbox 360 (Dashboard Update 14719)