FakeAnim (FreeBoot)

With the release of the new Dashlaunch 3.03 all owners FreeBoot consoles have an excellent ability to set your video format WMV 9 at the first start up the console zakruzki any dashboards. ieinstead of a white background with stripes and ball Xbox can set absolutely any your video format WMV 9. Of course, downloading video takes time, ieLaunch console will be delayed a bit, it is directly dependent on the length of the video clip, so do not put a whole movie to download)) At the time of launch Glitch-a roller adding absolutely no effect.It is also necessary to adjust the start time for your movie and a television system, choose the appropriate delay in the start of GPU, so you specified animation is not circumcised in the beginning. But as practice shows, just repeat what is shown in the video tutorial below

1. Copy over all files to the archive on the hard drive or USB flash drive your Xbox 360
2. Edit settings launch.ini, stored in the root of the stick / hard disk by specifying the parameter fakeanim way to your fakeamin.xex
3. Restart the console and make sure that heating starts. Ignore the red screen at the beginning of protsesa download
4. Once you are convinced about the program starts, only then remove bootanim.xex with memory (an internal Flash memory of the console) using FSD3 Explorer or FTP connection
5. Restart the console, and pay attention to the duration of the display screen red
6. Calibrate start editing the file fakeanim.ini and change the delay start, check the console, adjusting the initialization of GPU
7. When calibration is complete, edit fakeanim.ini calibration setting to "0"

The essence of the calibration management delayed the start of GPU. Ie changing the delay parameter you achieve minimum time to display a red screen and the most complete display of your movie.The - a number from 0 to 100 - each unit is 250 ms delay. Ie option = 10 zaderka 2.5 seconds. Safety check must be carried out on cold start the console.

Console Slim is recommended to start with a value of 5
Phat console with a value of 13.

Option delay - delay time
Parameter calibration - if set to 1 - calibrated at the start of the console displays a red screen. If set to 0 - proizodit calibration is already complete, that is, the need for a red screen disappears, when you start the console displays a black background.