PS3break firmware and instructions (PS3 software)

PS3break firmware and FAQ!

1. Download the program for the official update dongle - Free downloadDownloads: 176

2. Download the firmware file for downgrade - Free downloadDownloads: 191

3. Download the package files to downgrade the firmware - Free downloadDownloads: 129 and PS3 3.55 Downgrade (3.41)

4. Update the dongle to downgrade the firmware:
4.1. Run the downloaded firmware to the first link.
4.2. Select the drop-down list to the right of your dongle version 1.1 or 1.2
4.3. Insert the USB dongle into your computer and click "Upgrade". (For version 1.1 dongle pen or pencil for 1.2 finger).
4.4. Click "Open mHex File". And select the firmware file for the downgrade, which you downloaded in step 2.
4.5. Click "Program"

5. Turn on the console using the conventional method of launching dongle:
5.1. Disconnect from the outlet and then plug the power cord PS3
5.2. Insert the dongle into one of the USB connectors PS3. If connected to any other USB-devices, disconnect them. Otherwise, this could have an effect on operation of the dongle.
5.3. FAST consistently press the power button and eject the disc.

6. After a few minutes the console will automatically turn off, and the diode lights up red. You can be sure that the console is in factory mode and is ready to lower firmware version: Remove the dongle and turn on the console. If there was a large sign with a red background and white text "Playstation 3 Factory Service mode ', then everything went well.

7. Insert an empty USB flash drive into any computer, format it in FAT32, and then copy the files to the root of "PS3UPDAT.PUP" and 2. Lv2Diag.self (File 1) "from the archive. Once again, I will pay attention that there are no folders should not happen only two files and all.

8. Insert the flash drive into the USB port of the far right of the console.


9. Turn on the console and you will see a black screen. The process of installing the lower version will take 3-4 minutes. When the process is coming to an end, the power indicator of your console will start flashing green, then, turn off the prefix.

10. Turn on your console, you will still be in Factory mode. Make sure that the firmware version by going to the reduced section Settings-u003e system-u003e System Information. Turn off the console.

11.Vstavte USB flash drive into a computer, format it again and copy the file to the root of "Lv2Diag.self (File 2)" from the third archive.

12. Re-insert the USB flash drive into the USB port of the right-most set-top boxes, and turn the console, after 10 seconds it shuts down.

13. Remove the USB flash drive and turn on the console again. The console will exit the factory mode and have the firmware 3.41.

14. To return the dongle functions run copies of games, follow step 4, but instead of a file to downgrade select - Free downloadDownloads: 160


Tags: PS3 Software. Software. Soft. PS3 Soft. PS3 Software. PS3 FAQ. PS3. PlayStation 3. Firmware. Insertion
Discuss

---

Firmware Habib CFW 4.46 v1.09
1 ~~~ FAQ ~~~ 1 run any games and applications on the PS3 (full hacking)
1 1 ~~~ FAQ ~~~ How to throw the stick through the demo Horizon
PS3 Firmware Rogero CFW 4.40 v1.03
FAQ on updating the Dashboard on Freeboot-consoles